• 0
  • 1
  • 2
  • 3
  • 4
  • 5
998,04 TL
175,00 USD
Havale ve Kredi Kartı Peşin : TL   948,14
Seymour Duncan

Seymour Duncan Vapor Trail Analog Delay Pedalı

Ürün Kodu : 11900-002
Stok Durumu : Stokta var
Paylaş:
Kampanya

{{CMP.TITLE}}

{{CMP.DESCRIPTION}}

  • Ürün Özellikleri
  • Ödeme Seçenekleri
  • Yorumlar (0)
  • Tavsiye Et
  • Resimler
  • MarkaSeymour Duncan
    SeriPedal
    ModelVapor Trail - Analog Delay
    DurumuYeni

    The Vapor Trail is a true analog delay pedal using the famed Bucket Brigade Devices (BBDs), giving the pedal an authentic, vintage sound with warmth, fullness and depth, but with an immense clarity that keeps it from getting lost in the mix. Responsive modulation controls add shimmer and movement to your delay tone - with the Rate and Depth controls mounted right on the top panel so you can easily adjust them even in a live setting.

    A TRS insert jack allows you to add effects to the wet signal (loop the wet delay sound through a flanger, chorus, or other type of effect). You can also use this jack to output a wet-only signal for parallel effect loops or multi-amp setups, or you can plug in any standard volume-type pedal, crank the Mix knob to full, and vary the amount of wet signal from none to full-wet using the pedal. At maximum Wet setting, the first echo is actually 3dB louder than the dry signal.

    To round out the special features on this unit, we've made the Delay knob translucent with a cool blue LED that flashes to give you visual feedback on the delay time you have selected - especially handy when you're playing live!

    Designed and assembled in Santa Barbara, California.

    settings

    Slap Happy
    The slap-back delay is one of the most commonly used delay effects, giving a subtle thickening to the overall sound. It adds solid punch to power chords and depth to articulate solos.
    Run to the Edge
    Need we say more. Start picking some eighth notes and hear the magic!

    Vibro-Delay
    Classic long delay with light modulation gives an atomsphereic vibrato effect.

    Sparkle & Shine
    Light, airy delay with a lush and ambient trail off.
    Long and Liquid
    Heavier amount of classic delay that hangs in the air long enough to play off of.
    Dark Side
    Classic delay and modulation warmth, reminiscent of classic tape delay sounds.
    Rotating Speaker
    Rich, modulation delay that delivers the classic rotating speaker vibe.


    specifications


    Type of Circuitry: Analog Bucket Brigade Devices (BBDs) supported by modern low-noise analog electronics. No microprocessors or digital signal processors.

    Bypass: True bypass
    Delay Range: 15ms to 600ms. Actual delay time indicated by flash rate of illuminated delay time knob.

    Dry Gain: 1dB fixed
    Wet Gain: Adjustable from muted to +3dB. At the highest blend settings, the first echo is actually louder than the dry signal.

    Repeat Control Range: One repeat to runaway repeats
    Modulation Rate Range: 0.2Hz to 4 Hz
    Modulation Depth Range: Zero to 'over the top'
    Auxiliary Functions: Wet channel insert loop, allows external effects to be applied to only the wet signal. Also serves as a wet-only output for wet/dry stereo or studio use.

    Dry Frequency Response: <-1dB @ 10 Hz and 100 kHz
    Dry Distortion: 0.002% at 250 Hz, 1V RMS output
    Dry Noise Floor: -100dBv at output, 400Hz to 20kHz with input unplugged
    Wet Noise Floor: -90dBV at output, 400Hz to 20kHz
    Input Impedance: 1 Meg (active); open (bypassed)
    Output Impedance: 1K ohm

    Power: Internal 9V battery or external 9V-18V regulated power supply.
    Current Consumption: 11mA typical

    Dimensions: Chassis size 2.61' x 4.90' x 1.45' (W x L x H)
    Weight: 0.8lb. without battery

    Ürün Özellikleri
    Efekt Pedalları
    :
    Delay Pedalı
T-Soft E-Ticaret Sistemleriyle Hazırlanmıştır.