Türkçe
English
TC electronic Ditto Jam X2 Looper Pedalı
TC electronic Ditto Jam X2 Looper Loop Pedalı
One-touch looping and overdubbing
The hallmark of the TC Ditto series is its no-nonsense, single-switch looping and overdubbing. The Ditto Jam X2 carries on this tradition, with the addition of a stop switch for added convenience and time-critical loop operations.
Sync loops with any rhythmic source
The Ditto Jam X2 uses BeatSense technology to automatically shrink and stretch loops in time with any rhythmic element: strum patterns, backbeats, and more. No complex routing is required — Ditto Jam X2's onboard microphones continually sense tempo information and keep loops from drifting out of sync.
Onboard and external microphones
The Ditto Jam X2's onboard stereo microphones track tempo in a band or ensemble setting automatically. But for more exacting timing applications, an included external microphone, which attaches to a drum stand or acoustic guitar soundhole, yields more accurate tracking and a better signal-to-noise ratio.
External overdub sequence switch
The Ditto Jam X2's external toggle lets you change playback/overdub sequence to suit your needs.
- Rec-Play-Dub: Pedal enters playback mode immediately after recording. Tap to overdub.
- Rec-Dub-Play: Pedal enters overdub mode immediately after recording. Tap again to enter playback mode.
TC Electronic Ditto Jam X2 Looper Pedal Features:
- Automatically sync loops and backing tracks with any rhythmic source
- Onboard and external mics sense tempo from guitar strums and backbeats
- Captures live audio in stunning 24-bit resolution
- Simple single-switch operation
- Dedicated stop switch for time-critical record applications
- 2 minutes of loop time with unlimited overdubs
- Onboard memory stores loops even after the power is turned off
- True bypass switching preserves signal when pedal is disengaged
- External overdub sequence switch unlocks automatic playback and overdub modes
- Tap-tempo to manually slow and speed up loops
- Large Loop Level control can be accessed underfoot
Tech Specs
- Pedal Type: Looper with Mic
- Looper: Unlimited Overdubs
- Looping Time: 2 minutes
- Inputs: 1 x 1/4" TS (instrument), 1 x 1/8" (external mic)
- Outputs: 1 x 1/4" TS
- USB: 1 x Type Mini-B (firmware updates)
- True Bypass: Yes
- Power Source: 9V DC power supply (sold separately)
- Batteries: 1 x 9V or 2 x 9V (extend operating time)
- Power Usage: 150mA
- Height: 2.13"
- Width: 4.44"
- Depth: 5.31"
- Weight: 1.3 lbs.
Ürün Yorumları
